[nas] [PATCH] consistent gain setting in voxware server

[Erik Auerswald]

Hi,

On Wed, Jul 12, 2006 at 10:35:24PM -0600, Jon Trulson wrote:
> On Wed, 12 Jul 2006, Erik Auerswald wrote:
> >
> >P.S. I did not change the behaviour of setting the input gain because
> >this is implemented differently and I don't use NAS for input so I don't
> >know if it works correctly or not.
> >
> 
>         Nice, I had noticed that that did not seem to be working
>         correctly :)  Applied.

I just did some recording tests (on linux/x86, ALSA, kernel 2.6):

- the input gain is only set when recording has already started
  -> I'll write a patch to make this work just like the output gain

- On my system the wrong mixer parts are affected, i.e. the value of
  patching the line or mic input to output, but not the value used for
  recording (called 'IGain' by aumix). Selecting the input in aupanel
  (or audemo or ...) works insofar as the line resp. mic level is
  controlled, but the recording input selection is not done.

  These problems might come from my use of ALSA drivers and the OSS
  (voxware) NAS server. I don't want to change the current behaviour,
  because it might work correctly with OSS drivers on linux and/or on
  other systems using OSS resp. voxware drivers. Is there anybody for
  whom input selection and gain control work via NAS/voxware?

  Perhaps a config option to use a seperate input selection call and to
  control the IGain mixer value could be added to the voxware server
  (if someone finds out how to change these values...).

Erik