[nas] SiS 7018 (fwd)

Fri Mar 14 13:03:59 MST 2003

hi,

we hear no sound at all...

bye,

On Fri, 14 Mar 2003, Jon Trulson wrote:

> On Wed, 12 Mar 2003, Samuel Cossette wrote:
>
> > Date: Wed, 12 Mar 2003 21:51:39 -0500 (EST)
> > From: Samuel Cossette <public at levinux.org>
> > To: nas at radscan.com
> > Subject: [nas] SiS 7018 (fwd)
> >
> > Hi,
> >
> > We're trying to get nasd working with a SiS 7018 on-board (motherboard:
> > P6VEM3). The soundcard is working #1, cat bleh.au > /dev/dsp produce a
> > nice output and mpeg123 is working.
> >
> > We've straced nasd on a "working" soundcard and the SiS and there is no
> > difference at all...
> >
> > We've tried on ltsp, mandrake and slackware with the latest NASD 1.6 and
> > the 1.4.
> >
>
> 	What problem are you having?
>
> > thanks,
> >
> > Samuel T. Cossette
> > public-at-levinux.org
> >
> > here is the dmesg:
> >
> > Linux version 2.4.18 (root at midas) (gcc version 2.95.3 20010315 (release))
> > #4 Fri May 31 01:25:31 PDT 2002
> > BIOS-provided physical RAM map:
> >  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> >  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> >  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> >  BIOS-e820: 0000000000100000 - 0000000006ff0000 (usable)
> >  BIOS-e820: 0000000006ff0000 - 0000000006ff8000 (ACPI data)
> >  BIOS-e820: 0000000006ff8000 - 0000000007000000 (ACPI NVS)
> >  BIOS-e820: 00000000ffef0000 - 00000000fff00000 (reserved)
> >  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> > On node 0 totalpages: 28656
> > zone(0): 4096 pages.
> > zone(1): 24560 pages.
> > zone(2): 0 pages.
> > Kernel command line: auto BOOT_IMAGE=lin00x ro root=302
> > Initializing CPU#0
> > Detected 735.010 MHz processor.
> > Console: colour VGA+ 80x25
> > Calibrating delay loop... 1468.00 BogoMIPS
> > Memory: 109832k/114624k available (1536k kernel code, 4404k reserved, 426k
> > data, 228k init, 0k highmem)
> > Checking if this processor honours the WP bit even in supervisor mode...
> > Ok.
> > Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
> > Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
> > Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
> > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
> > Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
> > CPU: Before vendor init, caps: 00803035 80803035 00000000, vendor = 5
> > CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
> > CPU: L2 Cache: 64K (32 bytes/line)
> > CPU: After vendor init, caps: 00803135 80803035 00000000 00000000
> > CPU:     After generic, caps: 00803135 80803035 00000000 00000000
> > CPU:             Common caps: 00803135 80803035 00000000 00000000
> > CPU: Centaur VIA Samuel 2 stepping 03
> > Checking 'hlt' instruction... OK.
> > Checking for popad bug... OK.
> > POSIX conformance testing by UNIFIX
> > mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
> > mtrr: detected mtrr type: Intel
> > PCI: PCI BIOS revision 2.10 entry at 0xfd9f8, last bus=1
> > PCI: Using configuration type 1
> > PCI: Probing PCI hardware
> > PCI: Using IRQ router SIS [1039/0008] at 00:01.0
> > Linux NET4.0 for Linux 2.4
> > Based upon Swansea University Computer Society NET3.039
> > Initializing RT netlink socket
> > Starting kswapd
> > VFS: Diskquotas version dquot_6.4.0 initialized
> > Journalled Block Device driver loaded
> > pty: 512 Unix98 ptys configured
> > Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
> > SHARE_IRQ SERIAL_PCI enabled
> > ttyS00 at 0x03f8 (irq = 4) is a 16550A
> > Real Time Clock Driver v1.10e
> > block: 128 slots per queue, batch=32
> > RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
> > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx
> > SIS5513: IDE controller on PCI bus 00 dev 01
> > PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try using
> > pci=biosirq.
> > SIS5513: chipset revision 208
> > SIS5513: not 100% native mode: will probe irqs later
> > SiS630
> >     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
> >     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
> > hda: QUANTUM FIREBALL CR13.0A, ATA DISK drive
> > hdb: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > hda: 25429824 sectors (13020 MB) w/418KiB Cache, CHS=1582/255/63, UDMA(33)
> > hdb: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
> > Uniform CD-ROM driver Revision: 3.12
> > ide-floppy driver 0.97.sv
> > Partition check:
> > Floppy drive(s): fd0 is 1.44M
> > FDC 0 is a post-1991 82077
> > loop: loaded (max 8 devices)
> > ide-floppy driver 0.97.sv
> > SCSI subsystem driver Revision: 1.00
> > request_module[scsi_hostadapter]: Root fs not mounted
> > request_module[scsi_hostadapter]: Root fs not mounted
> > request_module[scsi_hostadapter]: Root fs not mounted
> > md: linear personality registered as nr 1
> > md: raid0 personality registered as nr 2
> > md: raid1 personality registered as nr 3
> > md: raid5 personality registered as nr 4
> > raid5: measuring checksumming speed
> >    8regs     :   554.800 MB/sec
> >    32regs    :   551.200 MB/sec
> >    pII_mmx   :   883.200 MB/sec
> >    p5_mmx    :   770.800 MB/sec
> > raid5: using function: pII_mmx (883.200 MB/sec)
> > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
> > md: Autodetecting RAID arrays.
> > md: autorun ...
> > md: ... autorun DONE.
> > LVM version 1.0.1-rc4(ish)(03/10/2001)
> > NET4: Linux TCP/IP 1.0 for NET4.0
> > IP Protocols: ICMP, UDP, TCP
> > IP: routing cache hash table of 512 buckets, 4Kbytes
> > TCP: Hash tables configured (established 8192 bind 8192)
> > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> > kjournald starting.  Commit interval 5 seconds
> > EXT3-fs: mounted filesystem with ordered data mode.
> > VFS: Mounted root (ext3 filesystem) readonly.
> > Freeing unused kernel memory: 228k freed
> > Adding Swap: 192772k swap-space (priority -1)
> > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> > Linux PCMCIA Card Services 3.1.33
> >   kernel build: 2.4.18 #1 Wed May 8 13:51:37 PDT 2002
> >   options:  [pci] [cardbus]
> > Intel ISA/PCI/CardBus PCIC probe:
> >   no bridges found.
> > Databook TCIC-2 PCMCIA probe: not found.
> > ds: no socket drivers loaded!
> > sis900.c: v1.08.02 11/30/2001
> > PCI: Found IRQ 11 for device 00:01.1
> > eth0: SiS 900 Internal MII PHY transceiver found at address 1.
> > eth0: Using transceiver found at address 1 as default
> > eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 11, 00:0a:e6:0b:41:32.
> > eth0: Media Link On 100mbps full-duplex
> > Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version
> > 0.14.9d, 00:45:21 May 31 2002
> > PCI: Found IRQ 11 for device 00:01.4
> > trident: SiS 7018 PCI Audio found at IO 0xde00, IRQ 11
> > ac97_codec: AC97 Audio codec, id: 0x5649:0x4161 (Unknown)
> > VFS: Disk change detected on device ide0(3,64)
> > ISO 9660 Extensions: Microsoft Joliet Level 3
> > ISO 9660 Extensions: RRIP_1991A
> >
> >
> >
>
> --
> Jon Trulson    mailto:jon at radscan.com
> ID: 1A9A2B09, FP: C23F328A721264E7 B6188192EC733962
> PGP keys at http://radscan.com/~jon/PGPKeys.txt
> #include <std/disclaimer.h>
> You talk like a Ferengi.
>