[nas] SiS 7018 (fwd)
Samuel Cossette
public at levinux.org
Wed Mar 12 19:51:39 MST 2003
Hi,
We're trying to get nasd working with a SiS 7018 on-board (motherboard:
P6VEM3). The soundcard is working #1, cat bleh.au > /dev/dsp produce a
nice output and mpeg123 is working.
We've straced nasd on a "working" soundcard and the SiS and there is no
difference at all...
We've tried on ltsp, mandrake and slackware with the latest NASD 1.6 and
the 1.4.
thanks,
Samuel T. Cossette
public-at-levinux.org
here is the dmesg:
Linux version 2.4.18 (root at midas) (gcc version 2.95.3 20010315 (release))
#4 Fri May 31 01:25:31 PDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000006ff0000 (usable)
BIOS-e820: 0000000006ff0000 - 0000000006ff8000 (ACPI data)
BIOS-e820: 0000000006ff8000 - 0000000007000000 (ACPI NVS)
BIOS-e820: 00000000ffef0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 28656
zone(0): 4096 pages.
zone(1): 24560 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=lin00x ro root=302
Initializing CPU#0
Detected 735.010 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1468.00 BogoMIPS
Memory: 109832k/114624k available (1536k kernel code, 4404k reserved, 426k
data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 00803035 80803035 00000000, vendor = 5
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
CPU: After vendor init, caps: 00803135 80803035 00000000 00000000
CPU: After generic, caps: 00803135 80803035 00000000 00000000
CPU: Common caps: 00803135 80803035 00000000 00000000
CPU: Centaur VIA Samuel 2 stepping 03
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9f8, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS [1039/0008] at 00:01.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
SIS5513: IDE controller on PCI bus 00 dev 01
PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try using
pci=biosirq.
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS630
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALL CR13.0A, ATA DISK drive
hdb: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 25429824 sectors (13020 MB) w/418KiB Cache, CHS=1582/255/63, UDMA(33)
hdb: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 554.800 MB/sec
32regs : 551.200 MB/sec
pII_mmx : 883.200 MB/sec
p5_mmx : 770.800 MB/sec
raid5: using function: pII_mmx (883.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.1-rc4(ish)(03/10/2001)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 228k freed
Adding Swap: 192772k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux PCMCIA Card Services 3.1.33
kernel build: 2.4.18 #1 Wed May 8 13:51:37 PDT 2002
options: [pci] [cardbus]
Intel ISA/PCI/CardBus PCIC probe:
no bridges found.
Databook TCIC-2 PCMCIA probe: not found.
ds: no socket drivers loaded!
sis900.c: v1.08.02 11/30/2001
PCI: Found IRQ 11 for device 00:01.1
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 11, 00:0a:e6:0b:41:32.
eth0: Media Link On 100mbps full-duplex
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version
0.14.9d, 00:45:21 May 31 2002
PCI: Found IRQ 11 for device 00:01.4
trident: SiS 7018 PCI Audio found at IO 0xde00, IRQ 11
ac97_codec: AC97 Audio codec, id: 0x5649:0x4161 (Unknown)
VFS: Disk change detected on device ide0(3,64)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
More information about the Nas
mailing list